Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 8020 — Kyocera FSC8026N

Code: 8020

Description: Optional document finisher punch motor problem
• The LOCK signal of the punch motor is detected for more than 500 ms while the punch motor is operating. However, the first 1 s after the punch motor is turned on is excluded from detection.
Causes: Loose connection of the punch motor connector. Defective punch motor. Defective finisher main PWB.
Remedy: Loose connection of the punch motor connector. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.
Defective punch motor. Replace the punch motor and check for correct operation.
Defective finisher main PWB. Replace the finisher main PWB and check for correct operation.

← Xem tất cả mã lỗi Kyocera FSC8026N

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie