Code: C6030
Description: Fuser thermistor 1 break error During warming up, fuser thermistor 1 does not detect temperature rise of 1C/ 1.8F for 10 s. When the difference of temperature of fuser thermistor 1 and 2 becomes 90aC/ 195F or more is detected continuously for 6 s.
Causes: Defective fuser heater 1. Installation defectiveness on fuser thermistor 1. Defective PWB.
Remedy: Defective fuser heater 1. Check for continuity across each heater. If none, replace the fuser unit.
Installation defectiveness on fuser thermistor 1. Measure the resistance. If it is ∞Ω, replace the fuser unit.
Defective PWB. Replace the power source PWB or engine PWB and check for correct operation.
Installation defectiveness on fuser thermistor 1. Measure the resistance. If it is ∞Ω, replace the fuser unit.
Defective PWB. Replace the power source PWB or engine PWB and check for correct operation.