Code: C7000
Description: Toner motor problem
fter driving of the toner motor starts, the error signal is not at the H level for 500 ms continuously.
fter driving of the toner motor starts, the error signal is not at the H level for 500 ms continuously.
Causes: Poor contact in the connector terminals. Broken the gear. Defective toner motor M/C/Y/K. Defective engine PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC26 on the engine PWB and the connector of the toner motor, and the continuity across the connector terminals. Repair or replace if necessary.
Broken the gear. Check visually and replace the gear if necessary.
Defective toner motor M/C/Y/K. Run maintenance item U135 and check if the toner motor operates. If not, replace the toner motor.
Defective engine PWB. Replace the engine PWB and check for correct operation.
Broken the gear. Check visually and replace the gear if necessary.
Defective toner motor M/C/Y/K. Run maintenance item U135 and check if the toner motor operates. If not, replace the toner motor.
Defective engine PWB. Replace the engine PWB and check for correct operation.