Code: C640
Description: Zero-crossing signal problem
• The engine PCB does not detect the zero-crossing signal for the time specified below. At power-on: 3 s Others: 5 s
• The engine PCB does not detect the zero-crossing signal for the time specified below. At power-on: 3 s Others: 5 s
Causes: Poor contact in the connector terminals. Defective power supply PCB. Defective engine PCB.
Remedy: Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Check if the zero-crossing signal is output from CN2-5 on the power supply PCB. If not, replace the power supply PCB. Replace the engine PCB if C640 is detected while CN2-5 on the power supply PCB outputs the zero-crossing signal.