Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C6400 — Kyocera KM1635

Code: C6400

Description: Zero-crossing signal problem The engine PWB does not detect the zero-crossing signal for the time specified below. At power-on: 3 s Others: 5 s
Causes: Poor contact in the connector terminals. Defective power supply PWB. Defective engine PWB.
Remedy: Poor contact in the connector terminals. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Defective power supply PWB. Check if the zero-crossing signal is output from YC2-5 on the power supply PWB. If not, replace the power supply PWB. Defective engine PWB. Replace the engine PWB if C6400 is detected while YC2-5 on the power supply PWB outputs the zero-crossing signal.

← Xem tất cả mã lỗi Kyocera KM1635

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie