Code: C3200
Description: Exposure lamp problem Non-lighting of the exposure lamp is detected at the beginning of copying.
Causes: Poor contact of the connector terminals. Defective exposure lamp or inverter PWB. Defective engine PWB. Incorrect shading position.
Remedy: Poor contact of the connector terminals. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Defective exposure lamp or inverter PWB. Replace the exposure lamp or inverter PWB. Defective engine PWB. Replace the engine PWB and check for correct operation. Incorrect shading position. Adjust the position of the contact glass (shading plate). If the problem still occurs, replace the scanner home position switch.