Code: C3100
Description: Scanner carriage problem
• The home position is not correct when the power is turned on or at the start of copying using the bypass table.
• The home position is not correct when the power is turned on or at the start of copying using the bypass table.
Causes: Poor contact in the connector terminals. Defective scanner home position switch. Defective main PCB or scanner drive PCB. Defective scanner motor.
Remedy: Check the connection of connector CN37 on the main PCB and the continuity across the connector terminals. Repair or replace if necessary. Replace the scanner home position switch. Replace the main PCB or scanner drive PCB and check for correct operation. Replace the scanner motor.