Description: Fuser unit thermistor break error The fuser unit thermistor break signal is detected continuously for 1 s.
Causes: Installation defectiveness on fuser unit thermistor 1 or 2. Defective fuser unit thermistor 1 or 2. Defective engine PWB.
Remedy: Installation defectiveness on fuser unit thermistor 1 or 2. Check the mounting state of the fuser unit thermistor 1 or 2. If any problem is found, repair it. Defective fuser unit thermistor 1 or 2. Replace the fuser unit thermistor 1 or 2. Defective engine PWB. Replace the engine PWB and check for correct operation.