Description: Centerfold main motor problem (optional centerfold unit of 3000-sheet document finisher) The motor lock signal is detected above 1000 ms during driving the centerfold main motor.
Causes: Poor contact in the connector terminals. Defective centerfold main motor. Defective PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC12 on the centerfold main PWB and the connector of the centerfold main motor, and the continuity across the connector terminals. Repair or replace if necessary. Defective centerfold main motor. Replace the centerfold main motor. Defective PWB. Replace the centerfold main PWB or finisher main PWB and check for correct operation.