Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C9040 — Kyocera KM3050

Code: C9040

Description: DP lift motor going up error (optional DP) The pulse count raised to 10000 at lifting, however, the DP lift switch could not be turned on. After one time retry, the DP lift limit switch could not be turned on.
Causes: Loose connection of the DP lift motor connector. Malfunction of the DP lift motor. Malfunction of the DP lift upper limit switch. Loose connection of the DP lift upper limit switch connector. Defective DP main PWB.
Remedy: Loose connection of the DP lift motor connector. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Malfunction of the DP lift motor. Replace the DP lift motor and check for correct operation. Malfunction of the DP lift upper limit switch. Replace the DP lift upper limit switch and check for correct operation. Loose connection of the DP lift upper limit switch connector. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Defective DP main PWB. Replace the DP main PWB and check for correct operation.

← Xem tất cả mã lỗi Kyocera KM3050

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie