Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E012 — Kyocera KM3650w

Code: E012

Description: Developer Press Motor Error
Causes: The Developer Press Sensor Signal (PRESS_S) does not change to “L” within 30 seconds after turning on.
Remedy: Wires 1 Are the wires among Developer Press Sensor (PH4), PW10520 PWB, Driver PWB B (PW6654) and Developer Press Motor (M4) connected properly? No Connect them properly. Developer Press Motor (M4) Driver PWB B (PW6654) 2 Turn off the machine, and then turn it on again. Is the Developer Unit moved to the Drum side? No Replace the Developer Press Motor or Driver PWB B. Developer Press Sensor (PH4) 3 Select the Signal Code “088” (Developer Press Sensor Signal) in the Device Status Mode, and then turn on the machine again. Does the status change from “H” to “L” after turning on? No Replace the Developer Press Sensor.

← Xem tất cả mã lỗi Kyocera KM3650w

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie