Code: C1010
Description: Upper lift motor problem [Drawer 1] • When the drawer 1 is inserted, the lift limit switch 1 does not turn on within 5.5 s of the upper lift motor turning on. • During copying, the lift limit switch 1 does not turn on within 200 ms of the upper lift motor turning on.
Causes: Broken gears or couplings of the upper lift motor. Defective upper lift motor. Poor contact of the lift motor 1 connector terminals. Defective lift limit switch 1. Poor contact of the lift limit switch 1 connector terminals.
Remedy: Replace the upper lift motor. Check for continuity across the coil. If none, replace the upper lift motor. Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace the cable. Check if CN 7-6 on the engine PCB goes low when the lift limit switch 1 is turned off. If not, replace the lift limit switch 1. Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace the cable.