Code: E012
Description: Developer Press Motor Error
Causes: The Developer Press Sensor Signal (PRESS_S) does not change to “L” within 30 seconds after turning on.
Remedy: Wires 1 Are the wires among Developer Press Sensor (PH4), PW10520 PWB, Driver PWB B (PW6654) and Developer Press Motor (M4) connected properly? No Connect them properly. Developer Press Motor (M4) Driver PWB B (PW6654) 2 Turn off the machine, and then turn it on again. Is the Developer Unit moved to the Drum side? No Replace the Developer Press Motor or Driver PWB B. Developer Press Sensor (PH4) 3 Select the Signal Code “088” (Developer Press Sensor Signal) in the Device Status Mode, and then turn on the machine again. Does the status change from “H” to “L” after turning on? No Replace the Developer Press Sensor.