Code: E034
Description: Developer Bias Output Error
Causes: The Developer Bias Output Detection Signal (BIAS_LD) continues to be “L” for 1 second or longer when the Developer Bias is supplied to the Developer Unit.
Remedy: Wires 1 Are wires among Developer Unit, HV Power Supply PWB and PW10520 PWB connected properly? No Connect them properly. Is the toner spill out from the Developer Unit? (Or is there any similar problem?) Yes Clean each Corona Wire, Grid Plate and housing. Developer Unit 2 Is the high voltage of Regulation Roller leaking? (The resistance between the central part of Regulation Roller and the Ground is 5 mega ohm or smaller if leaking.) Yes Replace the Regulation Roller. HV Power Supply 3 Can you fix the problem if you replace the HV Power Supply? Yes OK