Code: C5110
Description: Transfer high-voltage error Transfer short detection signal was input to CN3-3 on the engine main PCB when the transfer high-voltage REM signal was on.
Causes: The transfer charger wire or separation charger wire is broken. A foreign matter is adhering to the transfer charger wire or separation charger wire. The ST high-voltage transformer connector terminals are loosely connected or are making poor contact. The ST high-voltage transformer is defective.
Remedy: Replace the transfer charger wire or the separation charger wire. Clean the transfer charger wire or the separation charger wire. Reinsert the connector. Also check for continuity across the terminal wire and if none, remedy or replace the wire. Replace the ST high-voltage transformer and check for correct operation.