Code: C6400
Description: Zero-cross interruption error • The zero-cross signal was not input into CN3-1B on the engine main PCB for more than 5 s during fixing phase control.
Causes: Connector terminals are loosely connected or are making poor contact. The power source PCB is defective. The engine main PCB is defective.
Remedy: Check the connection of CN4-7 on the engine main PCB and CN9-1 on the power source PCB and continuity across the terminals. If there is abnormality, remedy or replace. Check if the zero-cross signal is output from CN9-1 on the power source PCB. If not, replace the PCB. Check if the zero-cross signal is input to CN4-7 on the engine main PCB. If not, replace the PCB.