Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C6000 — Kyocera KM5050

Code: C6000

Description: Fuser heater break Fuser unit thermistor 1 detected less than 70C/158F for 10 s during warm-up and ready in. During warm-up, the temperature at the fuser unit themistor 1 does not rise by 1C/1.8F continuously for 5 s. Fuser unit thermistor 2 detected less than 40C/104F for 10 s during warm-up and ready in. During warm-up, the temperature at the fuser unit themistor 2 does not rise by 1C/1.8F continuously for 5 s.
Causes: Defective fuser heater M or S. Installation defectiveness on fuser unit thermistor 1. Defective fuser unit thermostat. Defective PWB.
Remedy: Defective fuser heater M or S. Replace the fuser heater M or S. Installation defectiveness on fuser unit thermistor 1. Check the mounting state of the fuser unit thermistor 1. If any problem is found, repair it. Defective fuser unit thermostat. Replace the fuser unit thermostat. Defective PWB. Replace the power source PWB or engine PWB and check for correct operation.

← Xem tất cả mã lỗi Kyocera KM5050

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie