Code: C034
Description: Finisher communication problem 2 • Communication errors from the communication microcomputer (IC56) on the main PCB: No communication: there is no reply after 3 retries. Abnormal communication: a communication error (parity or checksum error) is detected five times in succession.
Causes: Poor contact of the connector terminals. Defective engine PCB. Defective main PCB. Defective finisher main PCB.
Remedy: Check the connection of connectors CN21 on the engine PCB and CN2 on the finisher main PCB, and the continuity across the connector terminals. Repair or replace if necessary. Replace the engine PCB and check for correct operation. Replace the main PCB and check for correct operation. Replace the finisher main PCB and check for correct operation.