Code: C220
Description: Side registration motor problem • A problem where the side registration home position switch does not turn off after the side registration motor has turned 30 steps or the switch does not turn on after the motor has turned 265 steps is detected twice in succession. (The first time, the copier indicates that the duplex unit is not inserted correctly, requesting the user to open and reinsert the duplex unit. After the second detection, the copier enters partial operation control.)
Causes: Defective side registration motor. Defective side registration home position switch. Poor contact of the connector terminals. Malfunction of the side registration guides.
Remedy: Check for continuity across the coil. If none, replace the side registration motor. Check if CN9-12 on the engine PCB goes high when the side registration home position switch is on and goes low when the switch is off. If not, replace the switch. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Check if the side registration guides operate smoothly. If not, repair.