Code: C740
Description: Toner hopper problem • The toner hopper lockup sensor does not turn off after the toner recycle motor has rotated for at least 1 minute.
Causes: Toner main hopper lockup. Defective toner hopper lockup sensor. Poor contact of the toner hopper lockup sensor connector terminals. Defective toner recycle motor. Poor contact of the toner recycle motor connector terminals.
Remedy: Remove the recycled toner in the toner main hopper if it locks up. Replace the toner hopper lockup sensor. Reinsert the connectors. Also check for continuity within the cable. If none, remedy or replace the cable. Check for continuity across the coils. If none, replace the recycle motor. Reinsert the connectors. Also check for continuity within the cable. If none, remedy or replace the cable.