Code: C1020
Description: Lower lift motor problem [Drawer 2] • When the drawer 2 is inserted, the lift limit switch 2 does not turn on within 5.5 s of the lower lift motor turning on. • During copying, the lift limit switch 2 does not turn on within 200 ms of the lower lift motor turning on.
Causes: Broken gears or couplings of the lower lift motor. Defective lower lift motor. Poor contact of the lower lift motor connector terminals. Defective lift limit switch 2. Poor contact of the lift limit switch 2 connector terminals.
Remedy: Replace the lower lift motor. Check for continuity across the coil. If none, replace the lower lift motor. Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace the cable. Check if CN7-22 on the engine PCB goes low when the lift limit switch 2 is turned off. If not, replace the lift limit switch 2. Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace the cable.