Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C6400 — Kyocera KM5530

Code: C6400

Description: Zero-crossing signal problem • The main PCB does not detect the zero-crossing signal (Z CROSS SIG) for the time specified below. At power-on: 3 s Others: 5 s
Causes: Poor contact in the connector terminals. Defective power source PCB. Defective main PCB.
Remedy: Check the connection of connectors CN17 on the main PCB and CN2 on the power source PCB, and the continuity across the connector terminals. Repair or replace if necessary. Check if the zero-crossing signal is output from CN2-7 on the power source PCB. If not, replace the power source PCB. Replace the main PCB if C6400 is detected while CN2-7 on the power source PCB outputs the zero-crossing signal.

← Xem tất cả mã lỗi Kyocera KM5530

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie