Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C6050 — Kyocera KM6030

Code: C6050

Description: Fuser thermistor abnormal temperature detection • During copying, the temperature at the heat roller lower than 120C/248F is detected continuously for 5 s.
Causes: Installation defectiveness on fuser thermistor M and S. Operation on fuser thermostat. Installation defectiveness on fuser heater L, M or S. Broken fuser heater L, M and S wire. Defective engine PWB. Defective AC power source PWB.
Remedy: Installation defectiveness on fuser thermistor M and S. Check the mounting state of the fuser thermistor M and S. If any problem is found, repair it. Operation on fuser thermostat. Check for continuity. If none, replace the fuser thermostat. Installation defectiveness on fuser heater L, M or S. Check the mounting state of the fuser thermistor L, M and S. If any problem is found, repair it. Broken fuser heater L, M and S wire. Check for continuity. If none, replace the fuser heater L, M and S. Defective engine PWB. Replace the engine PWB. Defective AC power source PWB. Replace the AC power source PWB.

← Xem tất cả mã lỗi Kyocera KM6030

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie