Code: C8020
Description: Document finisher punch motor problem • The LOCK signal of the punch motor is detected for more than 500 ms while the punch motor is operating. However, the first 1 s after the punch motor is turned on is excluded from detection.
Causes: Loose connection of the punch motor connector. Defective punch motor. Defective finisher main PWB.
Remedy: Loose connection of the punch motor connector. Check the connection of connector YC13 on the finisher main PWB and YC1 on the punch PWB. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Defective punch motor. Replace the punch motor and check for correct operation. Defective finisher main PWB. Replace the finisher main PWB and check for correct operation.