Code: C8150
Description: Document finisher multi job tray problem • When the multi job tray is not detected by the multi job tray upper limit detection sensor within 20 s from the moment it starts ascending. • During multi job tray descent, the multi job tray upper limit detection sensor does not turn off within 500 ms after it turns on.
Causes: Loose connection of the multi job tray elevation motor connector. Malfunction of the multi job tray elevation motor. Malfunction of the multi job tray upper limit detection sensor. Loose connection of the multi job tray upper limit detection sensor connector. Defective finisher main PWB.
Remedy: Loose connection of the multi job tray elevation motor connector. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Malfunction of the multi job tray elevation motor. Replace the multi job tray elevation motor and check for correct operation. Malfunction of the multi job tray upper limit detection sensor. Replace the multi job tray upper limit detection sensor and check for correct operation. Loose connection of the multi job tray upper limit detection sensor connector. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Defective finisher main PWB. Replace the finisher main PWB and check for correct operation.