Code: C8210
Description: Document finisher front stapler problem • During initialization, the front stapler is not detected in the home position within 500 ms after the front stapler returns to the home position. JAM90 is indicated the first time this problem occurs. If the problem occurs after initialization when the front cover is opened and closed, the problem is in the front stapler. • When the front stapler is operated from the home position, the front stapler home position sensor does not turn off within 500 ms.
Causes: Loose connection of the front stapler motor connector. Malfunction of the front stapler motor. Malfunction of the front stapler home position sensor. Loose connection of the front stapler home position sensor connector. Defective finisher main PWB.
Remedy: Loose connection of the front stapler motor connector. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Malfunction of the front stapler motor. Replace the front stapler motor and check for correct operation. Malfunction of the front stapler home position sensor. Replace the front stapler home position sensor and check for correct operation. Loose connection of the front stapler home position sensor connector. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Defective finisher main PWB. Replace the finisher main PWB and check for correct operation.