Code: C550
Description: Drum surface potential sensor problem 1 The sensor output is 0.5 V or less when MC REM signal is turned on.
Causes: Poor contact in the drum surface potential sensor connector theminals. Defective drum surface potential sensor. Defective engine PCB. Defective power source PCB.
Remedy: Check the connection of connector CN7 on the engine PCB and the continuity across the connector terminals. Repair or replace if necessary. Check if 24 V DC is output from CN7-8 on the engine PCB. If it is, replace the drum surface potential sensor. Check if 24 V DC is output from CN7-8 on the engine PCB. If not, replace the engine PCB. Check if 24 V DC is supplied to CN10-5 on the engine PCB. If not, replace the power source PCB.