Code: C640
Description: Zero-crossing signal problem • The main PCB does not detect the zero-crossing signal (Z CROSS SIG) for the time specified below. At power-on: 3 s Others: 5 s
Causes: Poor contact in the connector terminals. Defective power source PCB. Defective main PCB.
Remedy: Check the connection of connectors CN5-5 on the main PCB and CN2-7 on the power source PCB, and the continuity across the connector terminals. Repair or replace if necessary. Check if the zero-crossing signal is output from CN2-7 on the power source PCB. If not, replace the power source PCB. Replace the main PCB if C640 is detected while CN2-7 on the power source PCB outputs the zero-crossing signal.