Code: C5500
Description: Drum surface potential sensor problem 1 • The sensor output is 0.5 V or less when MC REM signal is turned on.
Causes: Poor contact inthe drum surfacepotential sensorconnector terminals. Defective drumsurface potentialsensor. Defective enginePCB. Defective highvoltage transformerPCB.
Remedy: Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace the cable. Replace the drum surface potential sensor. Replace the engine PCB and check for correct operation. Replace the high voltage transformer PCB and check for correct operation.