Code: C8150
Description: Multi job tray problem • When the multi job tray is not detected by the multi job tray upper limit detection sensor within 15 s from the moment it starts ascending. • During multi job tray descent, the multi job tray upper limit detection sensor does not turn off within 500 ms after it turns on.
Causes: Loose connection of the multi job tray elevation motor connector. Malfunction of the multi job tray elevation motor. Malfunction of the multi job tray upper limit detection sensor. Loose connection of the multi job tray upper limit detection sensor connector.
Remedy: Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Replace the multi job tray elevation motor and check for correct operation. Replace the multi job tray upper limit detection sensor and check for correct operation. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Replace the finisher main PCB and check for correct operation.