Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C8150 — Kyocera KM7530

Code: C8150

Description: Multi job tray problem • When the multi job tray is not detected by the multi job tray upper limit detection sensor within 15 s from the moment it starts ascending. • During multi job tray descent, the multi job tray upper limit detection sensor does not turn off within 500 ms after it turns on.
Causes: Loose connection of the multi job tray elevation motor connector. Malfunction of the multi job tray elevation motor. Malfunction of the multi job tray upper limit detection sensor. Loose connection of the multi job tray upper limit detection sensor connector.
Remedy: Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Replace the multi job tray elevation motor and check for correct operation. Replace the multi job tray upper limit detection sensor and check for correct operation. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Replace the finisher main PCB and check for correct operation.

← Xem tất cả mã lỗi Kyocera KM7530

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie