Code: C2300
Description: Fuser motor error • LOCK signal remains high for 1 s, 1 s after the fuser motor has turned on.
Causes: Poor contact in the fuser motor connector terminals. Defective fuser motor rotation control circuit. Defective drive transmission system. Defective duplex PWB or engine PWB.
Remedy: Poor contact in the fuser motor connector terminals. Check the connection of connector YC2 and YC4 on the duplex PWB. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Defective fuser motor rotation control circuit. Replace the fuser motor. Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any. Defective duplex PWB or engine PWB. Replace the duplex PWB or the engine PWB.