Code: C6050
Description: Fuser thermistor abnormal temperature detection • During copying, the temperature at the heat roller lower than 120C/248F is detected continuously for 5 s.
Causes: Installation defectiveness on fuser thermistor M and S. Operation on fuser thermostat. Installation defectiveness on fuser heater L, M or S. Broken fuser heater L, M and S wire. Defective engine PWB. Defective AC power source PWB.
Remedy: Installation defectiveness on fuser thermistor M and S. Check the mounting state of the fuser thermistor M and S. If any problem is found, repair it. Operation on fuser thermostat. Check for continuity. If none, replace the fuser thermostat. Installation defectiveness on fuser heater L, M or S. Check the mounting state of the fuser thermistor L, M and S. If any problem is found, repair it. Broken fuser heater L, M and S wire. Check for continuity. If none, replace the fuser heater L, M and S. Defective engine PWB. Replace the engine PWB. Defective AC power source PWB. Replace the AC power source PWB.