Code: C0400
Description: Exposure Lamp’s failure to turn ON
A Lamp-Out Detection signal is ON after the lapse of 5 sec. after the Exposure Lamp has been turned ON.
A Lamp-Out Detection signal is ON after the lapse of 5 sec. after the Exposure Lamp has been turned ON.
Remedy: 1 Exposure Lamp conduction NO: Change Exposure Lamp. 2 Temperature Fuse conduction. NO: Change Temperature Fuse. 3 Flat Cable conduction NO: Check for correct installation or change. 4 The problem has been eliminated through the checks of steps up to 3. NO: Change DC Power Supply 2. 5 Exposure Lamp turns ON and OFF correctly after DC Power Supply 2 has been replaced. NO: Change Image Processing Board.