Code: C0991
Description: LCC Lift 1 ascent motion failure
Remedy: 1 Lift 1 ascends after the LCC Lift-Up Motor has been energized. NO: Correct drive coupling (oneway gear engagement, coupling engagement, spring operation, and belt tension). 2 I/O check for Lift-Up Sensor 1 operation: the voltage across CN4A-6 on LCC Control Board and GND is DC 0 V when the sensor is unblocked and DC 5 V when the sensor is blocked (during lifting motion detection). YES: Change LCC Control Board. NO: Check sensor for installation. Check sensor connector for connection. Change sensor.