Code: C0F35
Description: Abnormally high toner density detected by Yellow ATDC Sensor
Toner density that is 4 % or more higher than the target level is detected ten consecutive times during a print cycle, ATVC, or image stabilization sequence.
Toner density that is 4 % or more higher than the target level is detected ten consecutive times during a print cycle, ATVC, or image stabilization sequence.
Remedy: 1 ATDC Sensor window is dirty. YES: Clean. 2 Bias voltage is properly applied to the ATDC Sensor window. NO: Check wiring. 3 The problem has been eliminated through the checks of steps up to 2. NO: Change Master Board.