Code: C0F36
Description: Abnormally low toner density detected by Black ATDC Sensor
Toner density that is 2 % or more lower than the target level is detected ten consecutive times during a print cycle, ATVC, or image stabilization sequence.
Toner density that is 2 % or more lower than the target level is detected ten consecutive times during a print cycle, ATVC, or image stabilization sequence.
Remedy: 1 Image density is low. YES: Check and correct Imaging Unit Bk Shutter. 2 The problem has been eliminated through the check of step 1. NO: Check and correct Hopper. 3 The problem has been eliminated through the check of step 2. NO: Change Master Board.