Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C0280 — Kyocera KMC2520

Code: C0280

Description: Communication problem between the fax control PWB and main PWB After main PWB status change signal turns on 1 minute, when it does not receive key required command from the fax control PWB, one time it resets the FAX.After that, while main PWB status change signal turns on furthermore 1 minute, when it does not receive key required command from the fax control PWB. When FAX_READY signal continues fake for 6 s, one time it resets the FAX. After that, when FAX_READY fake continues fake for 6 s.
Causes: Poor contact in the connector terminals. Defective PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC6 on the main PWB and the connector on the fax control PWB, connection of connector YC1 on the fax control PWB and the connector on the fax relay PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective PWB. Replace the fax control PWB or main PWB and check for correct operation.

← Xem tất cả mã lỗi Kyocera KMC2520

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie