Description: Drum motor BK error After the motor drive ON signal is output and 1 s elapses, the rated speed reach signal is not input continuously for 2 s.
Causes: Poor contact in the connector terminals. Defective drum motor BK. Defective PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC1 on the motor relay PWB and the connector on the drum motor BK, and the continuity across the connector terminals. Repair or replace if necessary. Defective drum motor BK. Replace the drum motor BK. Defective PWB. Replace the motor relay PWB or engine PWB and check for correct operation.