Code: C2300
Description: Fuser motor error After the motor drive ON signal is output and 1 s elapses, the rated speed reach signal is not input continuously for 2 s.
Causes: Poor contact in the connector terminals. Defective drive transmission system. Defective engine PWB. Defective fuser motor.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC27 on the engine PWB and the connector on the fuser motor, and the continuity across the connector terminals. Repair or replace if necessary. Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any. Defective engine PWB. Run maintenance item U030 and check if YC27-A10 (remote signal) on the engine PWB goes low. If not, replace the engine PWB. Defective fuser motor. Run maintenance item U030 and check if the fuser motor operates when YC27-A10 (remote signal) on the engine PWB goes low. If not, replace the fuser motor.