Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C6100 — Kyocera KMC2525E

Code: C6100

Description: Fuser heater 3 break Fuser thermistor 2 detected less than 100 C/212 F for 120 s during driving. Fuser thermistor 2 deduced less than 150 C/302 F for 300 s during driving. Fuser thermistor 2 deduced less than 100 C/212 F for 5 s during driving.
Causes: Defective fuser heater 3. Defective fuser thermostat 2. Installation defectiveness on fuser thermistor 2. Defective PWB.
Remedy: Defective fuser heater 3. Check for continuity across each heater. If none, replace the fuser unit. Defective fuser thermostat 2. Check for continuity across thermostat. If none, remove the cause and replace the fuser unit. Installation defectiveness on fuser thermistor 2. Measure the resistance. If it is ∞Ω, replace the fuser unit. Defective PWB. Replace the power source PWB or engine PWB and check for correct operation.

← Xem tất cả mã lỗi Kyocera KMC2525E

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie