Description: Developing K/fuser motor error • After the motor drive ON signal is output and 1 s elapses, the rated speed reach signal is not input continuously for 2 s.
Causes: Poor contact in the connector terminals. Defective developing K/fuser motor. Defective engine controller PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC27 on the engine controller PWB and the connector of the developing K/fuser motor. Repair or replace if necessary. Defective developing K/fuser motor. Replace the developing K/fuser motor. Defective engine controller PWB. Replace the engine controller PWB.