Code: C6050
Description: Upper fuser thermistor abnormal temperature detection • During copying, the temperature at the upper fuser roller lower than 120 C/ 248 F is detected continuously for 5 s.
Causes: Installation defectiveness on upper fuser thermistor. Operation on upper fuser thermostat. Defective engine controller PWB. Defective power supply PWB. Defective fuser PWB. Defective harness between fuser PWB and upper fuser thermistor, or poor contact of the connector terminals. Defective upper fuser heater lamp. Defective harness between fuser unit connectors and upper fuser heater lamp. Defective harness between fuser unit connectors and power supply PWB.
Remedy: Installation defectiveness on upper fuser thermistor. Check the mounting state of the upper fuser thermistor. If any problem is found, repair it. Operation on upper fuser thermostat. Replace the upper fuser thermostat. Defective engine controller PWB. Replace the engine controller PWB. Defective power supply PWB. Replace the power supply PWB. Defective fuser PWB. Replace the fuser PWB. Defective harness between fuser PWB and upper fuser thermistor, or poor contact of the connector terminals. Check the insertion of connectors of the fuser PWB. Repair if necessary. Defective upper fuser heater lamp. Replace the upper fuser heater lamp. Defective harness between fuser unit connectors and upper fuser heater lamp. Check the continuity of the harness and the insertion of connectors of the fuser PWB. Repair if necessary. Defective harness between fuser unit connectors and power supply PWB. Check the continuity of the harness and the insertion of connectors of the power supply PWB. Repair if necessary.