Code: C6100
Description: Lower fuser heater lamp break • The time for increasing the temperature at the upper fuser heater lamp to 60 C/140 F during warm-up exceeds 100 s from the start of warm-up. Then, the time for increasing the temperature from 60 C/140 F to 120 C/218 F exceeds 100 s.
Causes: Installation defectiveness on lower fuser thermistor. Operation on lower fuser thermostat. Defective engine controller PWB. Defective power supply PWB. Defective fuser PWB. Defective harness of lower fuser thermistor, or poor contact of the connector terminals. Defective lower fuser heater lamp.
Remedy: Installation defectiveness on lower fuser thermistor. Check the mounting state of the lower fuser thermistor. If any problem is found, repair it. Operation on lower fuser thermostat. Replace the lower fuser thermostat. Defective engine controller PWB. Replace the engine controller PWB. Defective power supply PWB. Replace the power supply PWB. Defective fuser PWB. Replace the fuser PWB. Defective harness of lower fuser thermistor, or poor contact of the connector terminals. Check the continuity of the harness of the lower fuser thermistor and the insertion of connectors of the fuser PWB. Repair if necessary. Defective lower fuser heater lamp. Replace the lower fuser heater lamp.