Code: C6150
Description: Lower fuser thermistor abnormal temperature detection • During copying, the temperature at the lower fuser roller lower than 100 C/ 212 F is detected continuously for 5 s.
Causes: Installation defectiveness on lower fuser thermistor. Operation on lower fuser thermostat. Defective engine controller PWB. Defective power supply PWB. Defective fuser PWB. Defective harness between fuser PWB and upper fuser thermistor, or poor contact of the connector terminals. Defective lower fuser heater lamp. Defective harness between fuser unit connectors and lower fuser heater lamp. Defective harness between fuser unit connectors and power supply PWB.
Remedy: Installation defectiveness on lower fuser thermistor. Check the mounting state of the lower fuser thermistor. If any problem is found, repair it. Operation on lower fuser thermostat. Replace the lower fuser thermostat. Defective engine controller PWB. Replace the engine controller PWB. Defective power supply PWB. Replace the power supply PWB. Defective fuser PWB. Replace the fuser PWB. Defective harness between fuser PWB and upper fuser thermistor, or poor contact of the connector terminals. Check the insertion of connectors of the fuser PWB. Repair if necessary. Defective lower fuser heater lamp. Replace the lower fuser heater lamp. Defective harness between fuser unit connectors and lower fuser heater lamp. Check the continuity of the harness and the insertion of connectors of the fuser PWB. Repair if necessary. Defective harness between fuser unit connectors and power supply PWB. Check the continuity of the harness and the insertion of connectors of the power supply PWB. Repair if necessary.