Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C0280 — Kyocera KMC2630D

Code: C0280

Description: Abnormal communication between scanner MIP PWB and fax control PWB • After scanner MIP PWB status change signal turns on 1 minute, when it does not receive key required command from the fax control PWB, one time it resets the FAX. After that, while scanner MIP PWB status change signal turns on furthermore 1 minute, when it does not receive key required command from the fax control PWB. • When FAX_READY signal continues “fake” for 6 s, one time it resets the FAX. After that, when FAX_READY “fake” continues “fake” for 6 s.
Causes: Poor contact in the connector terminals. Defective scanner MIP PWB or fax control PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC3 on the scanner MIP PWB and the connector CN1 on the fax control PWB. Repair or replace if necessary. Defective scanner MIP PWB or fax control PWB. Replace the scanner MIP PWB or fax control PWB and check for correct operation.

← Xem tất cả mã lỗi Kyocera KMC2630D

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie