Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C5304 — Kyocera KMC2630D

Code: C5304

Description: Eraser lamp Y break error • After the eraser lamp Y ON signal is turned on, the eraser lamp Y break signal is detected continuously for 200 ms.
Causes: Poor contact in the connector terminals. Defective eraser lamp Y.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC12 on the engine controller PWB and the connector of the eraser lamp Y, and the continuity across the connector terminals. Repair or replace if necessary. Defective eraser lamp Y. Replace the yellow process unit.

← Xem tất cả mã lỗi Kyocera KMC2630D

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie