Description: Printer PWB communication problem The printer PWB does not respond 120 s after the power is turned on.
Causes: Poor contact in the connector terminals. DIMM or DDR installed incorrectly. Defective PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC21 on the engine PWB and the connector YC7 on the printer PWB, and the continuity across the connector terminals. Repair or replace if necessary. DIMM or DDR installed incorrectly. Check the connection of DIMM or DDR. Repair or replace if necessary. Defective PWB. Replace the printer PWB or engine PWB and check for correct operation.