Code: C3100
Description: Scanner carriage problem The home position is not correct when the power is turned on or at the start of copying using the table.
Causes: Defective scanner PWB. Defective scanner home position switch. Defective scanner motor. Poor contact in the connector terminals. The mirror frame, exposure lamp, or scanner wire is defective.
Remedy: Defective scanner PWB. Replace the scanner PWB and check for correct operation. Defective scanner home position switch. Replace the scanner home position switch. Defective scanner motor. Replace the scanner motor. Poor contact in the connector terminals. Check the connection of connector YC4 on the scanner PWB and the connector on the scanner home position switch, and the connection of connector YC9 on the scanner PWB and the connector on the scanner motor and the continuity across the connector terminals. Repair or replace if necessary. The mirror frame, exposure lamp, or scanner wire is defective. Check if the mirror flames and exposure lamp are on the rail. And check the scanner wire winds correctly.