Description: Exposure lamp problem The exposure lamp is not turned on when starting the copy.
Causes: Poor contact in the connector terminals. Defective scanner PWB. Defective CCD PWB. Defective exposure lamp or inverter PWB. Incorrect shading position.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC6 on the scanner PWB and the connector on the inverter PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective scanner PWB. Replace the scanner PWB and check for correct operation. Defective CCD PWB. Replace the CCD PWB and check for correct operation. Defective exposure lamp or inverter PWB. Replace the exposure lamp or inverter PWB. Incorrect shading position. Adjust the position of the contact glass (shading plate). If the problem still occurs, replace the scanner home position switch.